RTS BP-4000-A4M Single-Channel Portable Beltpack Headset Station - 4-Pin XLR, Male

Name: RTS BP-4000-A4M Single-Channel Portable Beltpack Headset Station - 4-Pin XLR, Male
Brand: RedOne Music Canada

UPC800549831789

SKUBP-4000-A4M

CA$593.99

Online financing options available at checkout

Receive 2970 points when buying this product!

Available Online

Usually 1-2 weeks before shipment

Not In-Store

Visit Us

In case of additional delays, you will be contacted by one of our sales representative.

Any questions? We are here to help.

1-(888)-733-6631 Visit Help Center

Description

With the Telex BP4000A4M Single-Channel Portable Beltpack Headset Station, you can stay in communication on an RTS, Audiocom, or Clear-Com intercom system. This wired beltpack station features auto-wiring scheme detection, which automatically recognizes the system you plug it into, and configures itself to be used with it.

The beltpack also features intelligent power management, so you can daisy-chain up to 40 beltpacks by using a single (optional) PS-20 power supply. A current pump circuit constantly keeps tabs on overall cable length, versus the actual current consumption, so each beltpack receives the voltage it needs.

The BP-4000 has additional features to help make it easy to integrate it into an intercom system, including guided setup and various communication controls. Connections are made by means of a male, 4-pin XLR connection.

Enhanced Talk Button Control

You have the option to set your talk settings to either "always on", "always off", or "switching". A built-in blinking lamp gives you a visual indicator to incoming calls.

Remote Microphone Kill Switch

Any user on the intercom can instantly mute the mics on all attached BP4000A4M beltpacks by sending an inaudible "kill signal". This feature can be overridden if needed, but is useful to have in situations where an open mic somewhere in the partyline needs to be immediately silenced.

Voice Guided Setup

Rather than configure internal jumpers and switches, short voice prompts help you navigate the menu options to configure the BP4000A4M. If needed, you also have the ability to reset the beltpack to factory default settings.

Headset Compatibility

The BP4000A4M has a 4-pin male XLR port that is compatible with a (separately available) 4-pin female XLR headset. Both dynamic and electret headset microphones are supported.

Telex RTS BP4000 Specs

Connection	1 x XLR (4-Pin, Male)
Call Signaling	Balanced Intercom Channel: 20 kHz, Send and Receive Unbalanced Intercom Channel: 20 kHz/DC, Send and Receive
Mic Off Frequency	Balanced Intercom Channel: 24 kHz, Send and Receive
Output Level	Balanced Intercom Channel: 0.0 dBu, Nominal Unbalanced Intercom Channel: 0.0 dBu, Nominal
Load Impedance	Balanced: 300 Ohms Unbalanced: 200 Ohms
Noise	Balanced: < -60 dBu Unbalanced: < -60 dBu
Total Harmonic Distortion	Balanced: < 1.0% Unbalanced: < 1.0%
Bridging Impedance	Balanced: > 10 kOhms Unbalanced: > 10 kOhms
Headphone Amplifier	Maximum Output: > 140 mW into 150-Ohm Load Frequency Response: 200 Hz to 8 kHz (±2 dB) Audible Alert: 1 kHz Total Harmonic Distortion: < 1.0% Sidetone: > 20 dB Dynamic Range
Maximum Operating Current	Balanced: 52 mA Unbalanced: 45 mA
Power	18 to 33 VDC
Operating Temperature	32 to 131° F / 0 to 55° C)
Operating Humidity	5 to 95%, non-condensing
Storage Temperature	-4 to 158° F / -20 to 70° C
Storage Humidity	15 to 90%, Non-Condensing
Dimensions	3.7 x 1.3 x 4.7" / 95.2 x 34.2 x 119.2 mm 3.7 x 1.6 x 4.8" / 95.2 x 39.4 x 121.6 mm (with Belt Clip and Top Panel Button)

Packaging Info

Package Weight	1.25 lb
Box Dimensions (LxWxH)	8.6 x 6.5 x 2.15"

Estimated shipping calculator